Zombie Apocalypse Guy Finished!

In my last blog I posted some work in progress of an apocalyptic fellow I was working on. Today I finally finished him, so here's a photo:

I made the image "Greyscale" as I used 3 different coloured putties on him, plus the brass parts, so by making it grey in tone it makes it blend a lot better.

The figure will come in 4 parts because of casting reasons. The main figure is one part, but the hooks on his lower back, the hammer, and the chain are all separate parts which will need to be glued in place. Alternatively, the weapon doesn't need to be "glued" as it can be swivelled around to either be a hammer of an axe.

The chain will come separate which I will provide off a large reel of chains. This is because chains are often difficult to cast because of all the holes. So the buyer will be able to wrap the chain around the hammer however they think looks best. I like to think of it as customisation!

The hooks on the back may also cause casting difficulties, so for that reason again I have left them off (I used blue-tac in the photo haha). So again, it can either be left off, or for added detail it can be glued into place under his belt.

Finally, I will also be sending off the Grekwood sculpt along with the "not dalek" figure, who I shall name after the person it is based on, so Princess Bexi, to the casters. Hopefully these will not take too long to produce.

My full attention can now get back to those zombies!!

WIP Apocalypse Guy...

Here's a little WIP on the 45mm figures I have been making the past week...or so.

Here's a size comparison with a 28mm zombie nurse. He is meant to be around 9ft tall (ish), so he is in scale with all 28mm figures (and every other figure) we make :)

He is not finished yet, but he will hopefully be completed next week. He has a large weapon which will have a large hammer (with the appearance of a meat hammer ... you know that thing with those spikes/bumps on it that you hit meat with when you are angry.. I mean trying to tenderise it :P)

He has a long apron, which I will extend and make torn at the bottom. He have huge spikes impaled through his back. His head is covered with a bag/mask to help hide his identity and make him more creepy.

I shall call him... HammerMan. He's perfect for an extra addition in a zombie game ;)

Ok, that's all for now. I think I mentioned before that I am going to a show, wel that show has been confirmed and it is called "Crusade" right here in Cardiff. It's at the end of January, so I'm busy stocking up!

Comments welcome as always!

Supreme Dalek Princess

I have released to the world of Facebook my Supreme Dalek Princess! Here she is below:

I'm happy with how she has turned out, and Bexi (who it is based on) seems to be very happy and excited about it too, so yay! 

I have one last figure to complete (the 9ft tall man with an axe/hammer thingy-ma-bob). He is coming along nicely, and I am aiming to finish him by next week. Then, it's off to get them moulded along with the Grekwood Mini sculpted by Inso. Hopefully if all goes to plan, these will be available in time for Christmas.

In other news, the Hospital PDF has now be adjusted for American "Letter" size paper. I never thought about converting it from the UK paper size until the other day, as a customer from America bought everything hospital related on my website, so I decided to re-arrange some of the longer printouts so that they fit on American size paper.

So for future note, if anyone from America reads this, the PDF is now available in "Letter" size!

Finally, zombie progress is...progressing. I have focused my time on getting the big 45mm guy and the princess finished so they can go off for casting. But as soon as they are done, I'll be back onto the zombies.

If you haven't already, sign up to the newsletter too (if you want!).

Cheers...

Zombies and a Man with an Axe

We have recently just organised our first show!! In January we will be heading to "Crusade" here in Cardiff. It seems like a perfect place to start shows as it's only a few minutes away, which means cheap travel and no overnight expenses, so pretty much just the table cost!

So yeah, 26th (I think) of January, Crusade!!!!

In other news, progress on sculpting is going well. As I plan to go to a show/convention in January, I have decided that I want to have a few of the "extras" I've been working on ready. They include the Grekwood sculpt (Sculpted by Inso), the Dalek Princess, which I am thinking of making the "Bioblyte Princess" for my mutant guys which I plan to make into a range some time, and finally the 45mm guy who carries a large axe/hammer thing... he's also linked to zombies :P

I will also ave the 16 new zombies ready in time for christmas...hopefully!

Umm I better start getting ready soon; at lunch time we are leaving for Surrey for the CGD weekend! Should be fun, I get to test out my costume... which looks like this:

Righty oh then, oh if you want to subscribe to our newsletter for updates whenever something is released, then go to the main page of our website and fill out your name and email address of the form!

As always, cheers for ready :)

Zombie Masters... and other beings... coming shortly

Masters for the current batch of 28mm figures arrived today. So they have been sprayed white to show up the detail a bit better (silver is too reflective!). So, without any further delay, here they are:

4 Zombie nurses with "normal" zombie heads. Nice, how badly do you want these lovely ladies to look after you?!? haha

and  now for the behind shot...

 Some demon people. Kinda zombie like, just without arms flapping about. So they have a "straight jacket" appearance.  Their expanded chest has caused the front to tear open, making it a weak spot...or a weapon which squirts out infection?!?

... now for their behind shot...

Now for those mutants with guns! I like these, I know I sculpted them so I should like them right? But it's one of those things where you sculpt something and think...yeah, I really like them. I think I like the amount of detail I managed to put on them, and just because they were something different for me to sculpt.


So...behind shot, tubes everywhere, butts handing out...ummm.. yeah...





Ok that's those sorted for now. I assume that the production castings will be in my hands in the next week or two, but we'll have to wait and see. So I'l update when I know something. But for now, it's one step closer.

Once again, thank you for looking, feel free to use the photos to show friends and people who may like them. All comments are welcome as always. I will give an update on the Hospital beds and building next week. Cheers!