10% OFF Most Accessories

I have decided to give a 10% discount (through email order, not through the website) on most of the accessories I stock.

When you hover over "Accessories" on the menu, you will see sub sections called "Scenery", "Sculpting" and "Other". I have decided to give a 10% discount on everything under those 3 sections (apart from putty).

September 30th is the last day of the deal. You MUST email me with your order and I will send you a payment request, as it is not available through the website. Any website orders will NOT get the discount.

POSTAGE still applies to all orders.

Here's a little photo:

Click to ZOOOOOMMM

Cheers guys, spread the news with anyone you might think will be interested :)

New Stuff: Zombies, Roads, Buildings and a Bust

It's been a while since I did a blog post, a week and 5 days in fact!

So new releases:

I have uploaded 2 new road packs to the website. This completes the "town" range. The two packs have single yellow lines, and double yellow lines, along with an extra minor side road which has either a cobble style road or smaller paving slabs.

Here are the large photos from the website, I decided to put a car on there for "scale".

Town Centre - Restricted Parking (Single yellow lines)

Town Centre - No Waiting (Double yellow lines)







I still haven't uploaded that snow flock I have... So I must get round to doing that.

Supermarket zombies and building
The supermarket range should be coming back from the painter next week, so my next blog post will hopefully be showing off them all painted.

I have decided to build a local store as well as a large superstore. I am part way through designing the local store. It will have a small staff room, store room (not warehouse) and an office. It will also be the first building that I will be fully furnishing with paper freezers, shelves, veg stands, counters and so forth. The local store will be 12" x 12" in size, perfect for use with our roads (or with other companies products of course!).

Bust
Here's the bust I have been working on. The image is a few days old so it is a bit different now. What do you think? Still early days... and she will have long hair (yes I decided to go with a female), so features are less dominant than what a males would be. If she turns out well I will cast her in resin. I'm going with a mini head wound, a cheek wound, wearing around the mouth, and a neck wound which hasn't been done yet).

Finally..

I think that is all for now... Apologies once again for not getting around all the blogs I usually go through, it's just been a very busy couple of week. January and so far February have been extremely busy with online orders and other shenanigans!

Thanks to all for reading!

Grekwood Minis Display in Detail

Apologies for not getting around the blogs as much, I have been extremely busy getting everything ready for our first ever show next week, and I have been running back and forth to the hospital as my wife Kate had an operation  about 5 days ago. She is doing better though and will hopefully be home on Monday or Tuesday!

So..Grek Minis news! It's just under a week until Crusade here in Cardiff (UK), the first ever trade show where Grekwood Miniatures will be selling! I have been working hard to put together a display which looks decent enough to "launch us", and I think I haven't done too bad. Here's a few WIP photos of the display which I set up on my pool table which rarely gets used for pool! The edges of the table made things not sit right, but its good enough for a tester.

There are a few things missing from the cabinets as I have them elsewhere for photos. But you should get a general idea in the next couple of photos...






At the front I have the scenery stuff to the left, which I have placed on raised display stands which I made.

To the right (at the front) I have displayed more scenery items including ball bearings, bases, steampunk parts and so forth. I still need to put labels all over it.







Next up, is the cabinet. The right cabinet is all zombies and hospital beds, and the left cabinet is the sci fi/fantasy cabinet, along with putties and glues (and the snow) at the bottom.

If you look closely the Grekwood Sculpt is in the left cabinet. I'm making a label so it'll say coming soon!






In the left cabinet I have put a road section with my new convertible mini (if only it was real!). It's to help give scale and to show that it's what the PDFs should look like.











Next up is the space next tot eh cabinet. This is a "mock up" design, and not the final one. It was just to give me an idea of what it would look like. As I can't take the PDFs with me, I thought it would be nice to alert people that we sell those too.

The Pro Arte brushes and the paints. Those are not the correct paints. They are my collection so they don't all match up. But they will be the proper things on the day. The brushes will also be taken out of their plastic wrappers.

 Finally, here's a little photo of the new design hospital bed undercarriage. They are mainly made because of casting reasons, but they are narrower, which allows figures to "tuck" under the bed more closely, to help with space.







Maybe next year we will get a 12ft table, and actually put the hospital building out on show with our road sections, which by the way, we have 10 different versions now, all of which will be online soon.

Thanks again for all your support!

Supermarket Zombies Finished!

So the supermarket zombies are complete. They won't be available until early next year, but rest assured they are finished and on their way! I took some very quick photos, and because of the multicoloured putty used, I changed them to black and white. So apologies if that makes them a little difficult to see. They were just quick photos and not "promotion" photos.

What Next?
So what to do now they are finished? Well I have plans... important plans!

I have been asked by a couple of people about whether I will create a supermaket PDF. I have also been asked about supermarket accessories especially carts (I guess they mean shopping trollies??)

So... after some consideration, I have decided to build a supermarket PDF. It seems like that's going to become a theme, make some figures, and create a building to compliment them!

Shopping carts are a little more complex. Whilst they may seem easy to make. They will not cast in resin so easily because they are so small. Even card ones would prove tiny and fiddly to make. If there was a "train" of trollies, as in when they are all pushed together, then that might be a bit easier, but still awkward to make, but I'll see what happens.

More roads!!
On another note, we have 2 more road section PDFs to upload soon in the next couple of days. I just need to photograph them for the website, and combine all the PDFs into one file. The two packs are the "riser/fillers" pack, featuring squares of grass, tarmac, cobble stones, paving slabs and so forth. The other is similar to the residential roads pack, but rather than having tarmac pavements it will have paving slabs. This is to accommodate for different roads, as towns and such don't have tarmac pavements like residential areas! A screen shot is shown below...

Again these will only cost £1.50 each, and the will work perfectly with each other.
Finally, there has been no news on any of the castings I sent off (Dalek warrior/princess, Hammerman, Grekwood mini, and the sci fi alien dude), so no idea when those will be available, which makes me a bit sad as I wanted them for the show in January, but I'm thinking it may be unlikely..Ok, so that's it for now

Cheers for reading, comments are always welcome!

11 Zombies (WIP)

Here's 11 of the supermarket bunch. I have another 5 in progress, so hopefully I can finish them very soon.

From Left: Female warehouse worker in a high vis jacket. Next is a tall (purposely made slightly taller) worker. He is a bit of an everything, so a cleaner, trolley collector, or whatever else they might want him to do! In the middle is a male warehouse guy, again in a high vis jacket. Finally the two on the end are from the office/management of the supermarket.

I have two more office people to finish, and one cleaner which is almost complete.

From Left: Fish Monger! He's a bit torn up. Then a butcher, again he was made slightly taller as I wanted him to be quite a strong looking character. 3rd is a chef with a rolling pin! Now the last 3 are general workers, so cashiers, shelf stacker's and so on.

I have one "cheese counter" type female to finish, and one female worker.


ROADS
They are now available on the website. We plan to release quite a lot of variations of these. So there will be different paths (tarmac, paving slabs etc), different road types, so plain, single yellow, double yellow, etc.

It's to make it easier to customise your own road.

DISCOUNT
There re only 13 days left on the 10% discount. So if you are in need of sculpting putties, or trees for scenery, or glue, or ball bearings, then go check it out.

Cheers.. Comments always welcome!

Roads PDF

First off I'd like to thank and welcome all the new people who have start following my blog. I hope you will find it plenty of interest here in the future :)


PDF Roads
Later today I will be uploading the "residential roads" PDF download to the website. They will cost £1.50 to buy. The PDF will consist of 6 sections: straight main road, side straight road, T junction, Cross-roads, corner and dead end (everything in the photo). In the documentation I have explained how to convert them so they can be either "flat" or the pavemens raised to a different thickness. It also explains how to fix everything up.


We have also created a couple of "place fillers" to be placed between the road sections to help bring them up to the same level as the pavements, and to fill in any gaps around buildings and so forth. They are there to help with the appearance of the playing board instead of having a bare table, and a cheaper alternative to buying grass mats and all that (also, they are 6 x 6 inch squares). They include: Grass, Mud, paving area, smaller paving stone area, and finally a some tiny stones, so possible could be used as cobblestones and finally a tarmac area.

The below image shows a corner of the full piece. I didn't want to post the "full" piece as people can just print it from the photo. So I cropped them all to show part of it. So the selection is below. They will also be £1.50 (I think... need to check up on that).

Ok, so hopefully the roads will be online later tonight, and the "filler" things will be online some time during the week. I just need to finalise a few things.

Hospital Beds
These have proved to be extremely popular. However, as we are casting more and more, the undercarriage is causing problems with casting (wheels not coming out right and so forth). We are throwing away about half of what we cast. So after a LOT of calculations and thinking, I have decided to redesign the undercarriage, and get them cast in metal. This is a more expensive option, but we are currently getting a lot of miss-casts, so it's very time wasting. Therefore, getting them made in metal will free up our time for other things, and also, we will get a 100% casting result.

As I am redesigning them, I can add a bit more detail and change the design slightly  as a casting machine will pick it up better than hand casting. It also means I will need to increase the cost of each pack by a little bit. No much though, so they will still be relatively cheap to buy.

Anyway, I think that's it for now, So keep an eye out for those roads! We are planning to produce a few varieties, so stay tuned!

Cheers!

10% Discount, and Zombie WIP Photo!

In the spirit of Christmas I have decided to give a 10% discount on a couple of items. They include all sculpting putties, glues/conditioner pens, ball bearings and Trees.

Much of our stuff is already discounted or it is sold relatively cheap, so it's really difficult finding stuff to discount without loosing money. So the trees, being the most expensive items on the website, seem like a good idea to discount, along with the putties as every sculptor/converter needs putties. Glues and ball bearings are just random additions... glue is always useful right?! Also... good glue (which it is) is even better :)

So spread the word if you know of anyone who may be interested in any of those items. Offer ends December 20th.

On a side note, we are working on making some other roads printouts. We are designing ones with paved pavements (instead of tarmac), cobble stone roads etc etc We are thinking of selling them for about £1.50 for 6 road sections and a cool documentation written by me. It's probably worth mentioning that I haven't created the road sections. My dad decided to make some for a wargame he's planning with the zombies. So I've been the printing and testing guy, whilst he's put them together.

Finally, here is some more zombie WIP of two different characters. One is a "Fish Monger" and the other is a general workman/cleaner with a long overcoat. He is bald, and has some sticky out teeth :P

Any thoughts about what he should be dragging (if anything)... I was thinking a fish, but I might leave his hands bare.

Click to ZooOOMM

Until next time, thanks for reading! :)

Residential Roads PDF

I want to start by showing off the "new" logo. I redesigned the monk part to incorporate Gareth more, as he is of course "Grekwood". The old one never quite looked finished as it was more of a "sketch" look. So this is a proper picture now.

Now...for those roads!

As mentioned in an earlier post, we have been creating some roads for personal use, but have decided that since they have been made, why not pop them on the website for others if they want them. If not, we haven't lost anything as we wanted them to begin with, So it's a win win!

We made 6 basic road pieces which should allow for the creation of most road scenarios. The plain roads with no lines are for side streets. It's probably worth pointing out, these are for residential areas and not cities or towns. 

Click to zooOOMM

I have almost finished a documentation/instructions, so they will most likely be online soon. Finally, the corner was made as a "right angle" to make it easier to build and you don't get waste paper/cardboard which you do when cutting out a curved corner.

Each piece is 6" by 6", with the pavements being 1" and the roads being 4" wide. The pavements are also designed to be "raised" by 5mm. But this can be changed. I will explain how to do a conversion in the documentation, but it is really simple to do. So it means you can either have them flat, raise the pavements by 5mm, or anywhere in between.

That's it for now, cheers for reading, comment as always are welcome!

WIP Zombies, and Roads...

Once again it has been over a week since my last bog, so here's another one! I don't have a huge amount to talk about as I've just been busy jumping between a few different projects.

I sent off the 4 figures, HammerMan, Princess Bexi, Grekwood in a Fez, and, finally the sci fi alien. They are currently with a caster, but not sure when I'll get those back.

"Roads, where we're going we don't need roads!" (Back to the Future)...
We are currently working on some "road sections" which are designed to be mounted to foamboard (for pavements) and for the base. Although you can use thinner card for the road part. Either way, the pavements have to be on foam board (I guess if you wanted to you could alter it some how).

We plan make them for ourselves, but as I have a webstore, I may as well pop them online in case anyone else would like them! We will make a few different versions, such as tarmac roads with residential style tarmac pavements. Then roads with yellow lines, and then some with paved pathways etc etc. So we should be able to mix and match and get every combo we need.

Next Batch of Zombies: WIP
Here's a little WIP of the current batch of zombies, which is going well. A few of them are finished (such as the ones to the left on black bases). The two in the photo are almost there. The photo is a little old (like a few days), as the two figures have progressed since then. So remember, they are WIP, which means what you see isn't how the final thing will look... It's just a taster.

Clik to zoooOOOOMM

CGD Society Get Together Weekend

Here's a photo of me and Kate from the CGD weekend get together we went to last month... I should have worn the wig... but it was too hot in there! Anyway, who says a pirate can't look after their hair?? :P

Click to zooOOOMM

Ok, that's all for now! Comments as always are welcome :)

28mm Zombies, Mutants, Bases and a Newsletter!

Hey all,

I'll start quickly with a photo of some painted 28mm Bioblytes. I don't think I've posted this on the blog, so here they are. They are painted similar to some of the monsters in Mass Effect 3 (as you know I love that trilogy).

Click to ZOOOOM

Newsletter
I decided to add a "newsletter" to the website on the front page. So if you want to be alerted when new items are on-line, then feel free to go to the main page and fill out the small "newsletter" form.

I only plan to send out emails when new things are released, or if something changes on the website. So similar to the blog, just less often and more to the point! I mainly thought about the people who are not on Facebook or Blogger, so the best way for them to keep up to date is through email.

Here's the link: http://www.grekwoodminiatures.co.uk/

Website Photos
I finally retook the big bundle deal photo for the zombies. The previous one had the old bandaged nurses in it, so it now has the newer nurses in there. The photo is better in general too, more colour and slightly closer.

Here it is:

Click to ZOOOOOM

Sculpting
Yesterday I finally finished posing another 16 figures (zombies). I have finished sculpting 3 and 2 others are almost complete. I'm hoping to get these all done before xmas (in time for christmas), but we shall see.

I'm also working on another 45mm miniature. But I can't say too much at this stage. It is however zombie related in some form. Think along the lines of our "Executioner Steve", the "not silent hill" guy, but for that other popular video game/Movies.

Rock and Timber Bases
We have some bases in a number of sizes 50, 40, 30 and 25mm. I was thinking of finally adding them to the website. It would be bases like the one shown below (but in different size and shape rocks). They would be cheap like the other bases, as resin does not cost much to produce compared to metal.

Shows/Convensions
I'm contemplating going to a show here in Cardiff next January. It seems like a good place to start shows as it's only about 20-30 minutes away, so no overnight stays or any other costs. I just have to see how much it all costs.

I have also looked into those portable credit/debit card devices to hire for the show. Anyone ever had any experience with them as a trader (not a buyer)?

CGD Trip and a Pirate
So the CGD trip is next week, should be fun. I have my pirate costume almost complete, I just need to sort out the boots. I have decided not have a hat, just a bandanna will be good enough I think! This is mainly because I don't have a hat which is good enough!

Ok that's all for now... I think! Have a great day everyone :)

Zombies... And A PDF Hospital

I have finally finish the PDF's for the Hospital and I have uploaded it all to the website http://www.grekwoodminiatures.co.uk/PDFBuildings.php.

It costs £4, which is postage free as there is no postage! It consists of 3 files, which once purchased I will send through e-mail. Can't quite work out how to automatically do it. So please allow up to 24 hours for it to be delivered as I'm not ALWAYS on the internet... even though it may seem that way! haha

Ok so here's some painted zombie nurses!! I think they look pretty decent. I painted/made the bases (which are also available on the website). I've now uploaded this to the website :)

I need to do one last photograph with these for the big bundle deal as I think the old bandaged face nurses are in the "buy all 4" photo... eek! So expect photos of that soon.

Righty oh then, I think that's all for now. So until next time, have fun, and don't get bitten by any zombies!! ..arrgghhh

PDF Hospital Building, Zombies, and Armless Beings

Yesterday I went to my parents house to set up the single story, two ward hospital. It went pretty well. We set up the table with a grass mat, then placed the hospital down, and placed some trees around the perimeter. There was a gap at the edge of the table, so we placed some buildings at the end of the table to make it look like the edge of a town.

So here's a photo of the end product:

I think it turned out really well. We used some resin roads which my dad made a long time ago for a war game with my brother Gareth a.k.a Grekwood. 

Here's a view of the inside. We set up some hospital beds inside, along with some doctors and nurses, but we didn't have any normal doctors or nurses, so they are all zombies... but they aren't meant to be!! That'll be saved for the derelict version (post apocalyptic version) to come at a later date!

Finally I shall end with a photo of  how the table as a whole looked. We  arranged the trees in a way so that they were all in frame. We thought there was no point filling the whole table if it wasn't going to be in the photo. So that explains the weird arrangement of trees below!

I will finalise things today and the PDF file will be uploaded (hopefully) tomorrow or the over the weekend. I'll update the blog/Facebook when this is done!

Oh and here's an image of the Armless Beings now they are all painted :)

Cheers for looking, all comments are welcome as always!

Hospital PDF Coming Next Week!!

I have been working extremely hard to get the documentation for the PDF Hospital finished. It's almost there.

Below is a screen show (from MS Word) which shows the documentation/instructions. It is about 23 pages long. I know this probably sounds crazy, but I made it as detailed as possible as not all customers have English as their first language. Therefore there are step by step photographs as well as a description.

It is quite a big build (even though it is a small hospital... I plan to bring out expansion packs/apocalyptic versions). It tells you how to build two full wards, two hallway end pieces, a center entrance piece, and finally some entrance steps, not to forget all the different roofing pieces to go with it. Remember, you don't have to print it out as the images can be zoomed in on when on a computer!

I am in the process of designing some signs which will be on a separate page for people to cut out and stick where they want. I want them separate so when they are glued in place, they can be stuck to the wall however you want, for example: at an angle, with an edge curled up and so forth. It's a bit of personalisation. I also have multiple door signs, so people can choose if they want one room to be a storage room or a kitchen or even a staff room or office.

I think on Wednesday I will be heading to my parents to photograph the 2 ward hospital with some proper scenery. We opened up a few bags of trees (from our tree range here: Grek Trees), so we can make a bit of a woods in the background on the image. Once this has been done, I should be ready to upload it to the internet! I have been advised that for this size and complexity, I should charge about £4, but it will be postage free of course.


We are currently in the process of casting some more hospital beds as we have almost run out. I'm also trying to promote the page on Facebook as much as I can, so if you are on Facebook, remember to "like" and share it to anyone who may be interested.

Cheers, and have a great day!

28mm Scale Hospital Almost Ready!

This is my 40th post. I didn't realise I had posted 40 already! Seems like only yesterday I arrived at blogger.

Hospital PDF
Yesterday I started some work on the hospital building documentation. I really want to just get this sorted and online. So I spent most of yesterday doing it and I managed to finish the instructions for building the ward. Only bits left are the roof, and the joining hallway which I will do in the next day or two. I'm hopefully looking at an upload of the PDF files (there will be 2) next week, early if possible.

When I say 2, I mean one set of instructions, and then another file with all the printouts. The documentation is long, but it is a step by step guide which has step by step photos. Hopefully this will make it easier to follow and construct. I plan to release the hospital as just a building, so no interior furniture.  One day I plan to create some resin furniture to be released at some point in the future but for now I want to get this done quickly as I want to "move on" from the hospital setting and onto different things!

Here's a photo example of one of the steps, so you can see what I mean. I photographed it on my pool/snooker table. I thought the green worked well hehe

Grekwood Sculpt, Dalek Princess and more!
I have decided that when I get the Grekwood sculpt cast, I will put him in a mould with the Dalek Princess (in previous post), 8 figures from a new range, which will include a horse, and then maybe an extra one or two "special" figures, possibly zombie related. No idea when this will be done though, but if I work hard I can aim to get it done before Christmas. When casting figures I tend to fill up the mould as rubber for the mould is very expensive, and it just works out cheaper this way (which as a new hobby/business I need to keep costs down). Maybe when I am established like the big companies out there, I can bring things out quicker! I'm currently working on another 16 zombies, so I will work on everything else here and there.

In case you didn't see my last post, here's the Dalek Princess I am talking about.

Click to ZOOOOM

Kate - She's on TV!
I realised I never gave an update about Kate. Her liver biopsy was confusing and didn't specifically pin point anything. So they gave her some steroids (not those anabolic ones!), and that seems to be bringing the levels down.

On a plus, she went to Tenby (South Wales) yesterday as she is filming as an extra in a TV series which I think will air next year. So gotta watch that to see if I can spot her!

Long hair no more!
After just over a year, I got my hair cut. I went from a pirate look, to more of a Dr Who look, something in-between the current doctor (Matt Smith) and the previous one (David Tennant). It took around an hour to cut (longest it's ever taken). I apparently had so many kinks in it that they had to use a hair dryer (to dry the water they put in), then hair straighteners and tons of spray, all to make it easier to cut and help get rid of the kinks! It looks better now :)

Righty oh, have a great day!

Pirate Accessories and 28mm Scale Hospital!

This week I have been working on my pirate costume. It was in need of a sword and a gun, so using some Amazon vouchers which my wife got for doing some surveys, we purchased a nice cheap gun and sword all for under a tenner (so for free with the vouchers!).


The gun was all silver when it arrived as seen in this photo: (that's not my hand.. it's taken from the Amazon website as I forgot to take a "before" photo...). So, I wasn't keen on the silver finish, or the orange tip, so I decided to give it a make over.

As you can see, I sprayed it gold, then gave it a brown wash over the detail. I then painted the inside of the gun black, and "aged" the tip to give it that "used" look.

I think it looks much better and looks less "plasticy".

What do you think?

Second up is the sword! I bought this for two reasons. Most looked small (short) and kinda of childish (as they are toys!). This one had a longer blade, and quite a cool looking handle compared to bare metal.

However, when it arrived the blade was broke. So I had to pin it, glue it, and stuff some Miliput over the join to make it stronger. The join is noticeable, but at least it wont break now.The blade was also black and not silver like Amazon shows. So I didn't like that. Also the skull needed something... so in my next photo you'll see the difference!

I painted the teeth, and put in a gold tooth, and also painted the blade silver. I wasn't liking that black colour!

Here's the finished stuff... well, the gun still needs some painting on parts (trigger area and such). But I think I have made cheap toys look better :)








Ok, so here's some pictures of the hospital which I thought I posted, but apparently not. There was some questions about whether it was one piece or many. The answer is, it can be either. It's designed to be separate as shown (for easy storage and moving).

BUT!! If you are up to the task, it can easily be made as one large piece as shown below: It would just need some calculations to get the floor and roof as one piece, but it shouldn't be too difficult. Ideally it comes apart as this version is only small, and it's designed to eventually be bigger. But that's your choice :)

In the documentation I will provide all the measurments to make it one piece or separate. So it's up to you then how you want to make it. But keep in mind I will be expanding the hospital with new parts ad so forth.

Anyway, that's all for now. Sculpting has once again begun, so yay for that. I'll do some more in a bit. I tend to split my time between quite a few things (not all business!). Anyway, I hope that helps with whoever had those questions or thoughts.

Feel free to leave comments as usual, but until then, over!

28mm Hospital almost complete!

Here are some more WIP photos of the hospital I am building.

A day or two ago I decided to finally put a roof onto the building. So I spent part of yesterday putting all the wall pieces together on the computer, printing them out, then glueing them to the ceiling wall sections. So here are the photos.

Front Angle: in the middle of the "link" hallway, I will be putting an entrance door. maybe a small step to get into the building, maybe even a ramp for disabled people (need to cover every possibility!).

Rear Angle: That's pretty much all it is!!

 Front: The entrance will be in the centre. I still need to put the paving stones around the top of the "ceiling wall". There are some already on at the back of the left ward.

Finally here's a photo of how it all breaks down for easy storage. We plan to have 10 wards made (full scale ward for a game (2 story building). So they all stack nicely on the top shelf of a cabinet.








I have had a bit of trouble making this, not because it is complicated, but because the foam board I was using was dodgy. It's meant to be 5mm thick, but I found myself working with 6mm and even 7mm thick foam board (from "The Range"), which varied in thickness from one end to the other. So when putting the building together there are some gaps. Anyway, it's designed for 5mm foam board. So as long as that is used there should be no problems.

My dad bought a few sheets from Hobby Craft about a week ago (it was less than £3 for an A2 size sheet). They are all 5mm, so my dad is helping to build a few extra wards as I'm busy packing (house move), and trying to get a bit of sculpting in here and there. I have build 5 so far, my dad is going to make 4, and I need to make one more to take photos of for the documentation (which is almost written).

Anyway, that's it for now, oh that figure in the photo is a new sculpt, but you probably can't see it that well as it's far away.

Cheers for reading :) I'm hoping to have the "basic" singe story hospital online in September.

Hospital Building Progress

Here are some photos of the hospital. I have positioned them in some different layouts to give ideas of what can be done.

  To the left is the "basic" hospital. I plan to pop the PDF online with one ward colour (grey), and the 3 hallway parts shown (which are shown in grey). It will allow the builder to create a ground floor, 2 ward hospital for smaller games. This is perfect for the "Mega deal" of hospital beds as each ward fits 8 beds (so 16 altogether!).

 An expansion pack will be released later which will include a 4th bit of hallway (the part connecting to the green ward). This allows the ward to go as wide as you like. It will also include a stairs/lifts to get to a further floor, and new wall prints for the "longer hallway" part, which will accommodate for the lifts/stair doors.

As the expansion pack allows you to go wider and taller, I will also provide a "fire escape" stairs to connect to the exterior (left).

Photo to the right shows the the "basic" size, which goes up to a second level. I will also be working eventually on an entrance pack, which will connect to the mid section. It's not essential, it's just something hard core gamers might like as an "add-on".






To the left is the "ultimate" layout. It will have 3 wards along the back, and two wards on the front, and an entrance in the middle. This is the design I am aiming to build, although it will take up

Right: Shows how the lift/stairs and entrance would connect to the centre piece of hallway/corridor.

Finally, an alternate layout which I might do one day. I'm only doing this as a side project when I get bored of sculpting and stuff.

That's all for now with the hospital. I'll probably start uploading stuff to the website for it next month. Ohh totally forgot, so a few weeks ago I was talking about moving and houses all going too quickly. About a week after I wrote that blog, a new apartment popped up online, we went to see it and agreed to it there and then! It has a great sized 2nd bedroom, which is perfect to make as a proper office/workroom. It has a master bedroom with ensuite, main bathroom, and an open plan kitchen/lounge. The lounge is a little on the small side, but it should be good enough to get a sofa and dining table in there (with the TV and bookcase of course!). We get the keys on Sept 6th, but we plan to move in on the 7th. So we've been packing things up, which means a lot of my sculpting/hobby/business stuff has been packed up!! But it's ok, I'm keeping a bare minimum of stuff out to keep me going!

Righty oh then, that's all until next time. Cheers again to everyone who has bought some of the recent items!